Gold Lifetime Member
Join Date: Dec 1999
Location: Yorkville, Illinois USA
Re: Parts list for 4 Speed conversion
It's really not as much as you'd think.
you'll need a transmission. "Camaro" muncies had the speedo drive on the right. This causes complications with a changeover. Best is to get a big car or vette trans, that way the speedo bable you have will fit.
Bellhousing, flywheel, clutch, pressure plate, & throwout bearing: 10.4 or 11" clutch, pick one. 10.4 would be easier, your starter will fit, and the flywheel and bell are easier to find and cheaper to buy. (can be found used) Clutch, pressure plate and short throwout bearing will be new, from a parts store or summit.
Pedal set, linkage kit, fork: All readily available at the repro houses cheap. Watch out for the clutch fork, lotsa people end up with a "heavy duty" fork, these are really for second gens, and they don't fit right.
Hurst shifter and installation kit, for your 67 camaro, available new from summit/jegs, etc.
Misc. nuts and bolts. repro house or hardware store.
Seriously that is it. Your driveshaft, crossmember, speedo cable, and starter all fit (if you go with the 10.4" clutch and non camaro trans)