Re: Hitting the dyno next week
Everything in the block was changed, full rotating assembly and roller blower cam. The machine shop that built the motor builds alot of blower motors and they use to race one. Who ever built the motor to begin with didn't build it right, didn't have a blower cam and all the internals I was told by the PO were forged and they were not so lets do this right, the only way I know how to do it. Like everything else with the car the PO made it look good but there was alot wrong with the car when I got it. I will have all the specs on the motor after we dyno it. Right now it's set up 1 to 1 but I have another blower pully so when we dyno it were going to run it 3 different ways, underdriven, overdrived with race gas and 1 to 1. It will be set up 1 to 1 to be street driven.