SAE/DOT compliant led tail lights for the 67 RS and 68 standard brake and reverse tail lights. They have an 1157 plug on them and are a direct replacement of you bulb and lense. Sealed units with a limited lifetime warranty. More applications will be available soon. Price is $99 for either set. You can call or purchase them through our online store at www.musclerodz.com. We have a lowest price guarantee where we will match or beat any publicly advertised price on the products we carry.

Got any up close and personal pictures of these units?

I do but I can't post them using the computer i am on now. I will post later tonight or tommorrow.

Mike

here are some better pics

Got any pics of them lit up?

I likey.....:D

'69 ?

:cool:

Got any pics of them lit up?

I likey.....:DI am putting together a light board to show them lit up.

Mike

'69 ?

:cool:
I was told spring or summer before they are available

Mike

hmmm I'd love to give someone one less excuse NOT to plow into from behind because my 40 yr old tail lights weren't up to par. :yes:

Got any pics of them lit up?

I likey.....:D
Camaro Preformers March '07 issue has an article on them. Only thing is the price they mention wrong is the price.

Mike

so would you need 2 sets for the RS lights? @$99?

so would you need 2 sets for the RS lights? @$99?
No, one set, and the price is now $119 for the pair. $99 is almost what my cost is for them so I had to bump them a little.

I like them also.
Are these "plug and play" or are there other mods (diode or something) needed due to the low amp draw ?

Now about that price increase being faster than the rising cost of gas :D lol jk

I like them also.
Are these "plug and play" or are there other mods (diode or something) needed due to the low amp draw ?

Now about that price increase being faster than the rising cost of gas :D lol jk
Yes, plug and play, no diodes, just plug straight into the 1157 socket. this thread shows a pic of them lighted up on a set i sold that went to the Netherlands. http://www.pro-touring.com/forum/showthread.php?t=26987

Seen that you can buy separate ? Just the (red) standard tails ?

http://www.pro-touring.com/forum/attachment.php?attachmentid=15859&d=1172699347 <--link to pic

Seen that you can buy separate ? Just the (red) standard tails ?

http://www.pro-touring.com/forum/attachment.php?attachmentid=15859&d=1172699347 <--link to pic

yes you can buy just the brake lights seperatley on the 68 standard lights, $49.50.

Mike

Saving pennies now :D

Will they work with a standard bi-metal turn signal flasher?

Will they work with a standard bi-metal turn signal flasher?
yes, no problems of any type has been reported to me with any installations

Mike

I tried to order these on your website but all you have are 67 RS and 68 Standard.
I need 68 RS, do you have them, and if so , how do I order them?

The 67 LED's should work in the 68 housing. the only difference in the originals were the lens styles. If they don't fit for some reason, I will refund your money 100%

Mike

Need all the help I can get down here in God's waiting room making sure they can see me (Kissimmee, Florida). Ordered a $49 set today.......

The 67 LED's should work in the 68 housing. the only difference in the originals were the lens styles. If they don't fit for some reason, I will refund your money 100%

Mike
The 67 and 68 are quite different. The 67's are smooth all across the surface and the 68's have 2 sections that project out of the bezel.
I don't see how a 67 will fit properly in a 68.
Can you check with your supplier to see when a 68 RS will be available?

The 67 and 68 are quite different. The 67's are smooth all across the surface and the 68's have 2 sections that project out of the bezel.
I don't see how a 67 will fit properly in a 68.
Can you check with your supplier to see when a 68 RS will be available?

I reread the article in Camaro Performers and they installed the 67 RS units in 68 bezels. The LED lenses have a releaf in the center of them as well. I will also call a buddy next week and see if he has a 68 bezel I can test fit them in. I would use mine but I sold them and got 67 bezels awhile back

Mike

Anyone buying these who wants to take some nice before and after pics with brake lights activated would be cool.

Here is pics from a set I sold that went to the Netherlands
http://www.pro-touring.com/forum/attachment.php?attachmentid=15859&thumb=1&d=1172699347

OK....lets see if I can get it right THIS TIME....

here is a scan of a set of these tail lights as seen in the March 2007 issue of "Camaro Performers" magazine. This is them LIT.....

They are from a company called United Pacific........They have the 67 RS lights 68 red lenses and the 68 WHITE reverse lights.....

their site is..... www.uapac.com (http://www.uapac.com)

OK....lets see if I can get it right THIS TIME....

here is a scan of a set of these tail lights as seen in the March 2007 issue of "Camaro Performers" magazine. This is them LIT.....

They are from a company called United Pacific........They have the 67 RS lights 68 red lenses and the 68 WHITE reverse lights.....

their site is..... www.uapac.com (http://www.uapac.com)

Thanks for posting a good pic. Other than information, you can't purchase direct from them, you have to go through a dealer such as us . That is the 67 RS units in a 68 bezel.

Mike

Hi, any idea if there are plans to make these for the base model '67 camaro? Thanks

Hi, any idea if there are plans to make these for the base model '67 camaro? Thanks
Not sure but I will ask the next time I place an order. I would think so. They are adding new units every month or so

Mike

I received my set yesterday for a 68 standard. Installation was fast and simple, everything fit perfect. How bright are they you ask? Lets just say the guy driving behind me put on sunglasses and sun screen. :cool:

I received my set yesterday for a 68 standard. Installation was fast and simple, everything fit perfect. How bright are they you ask? Lets just say the guy driving behind me put on sunglasses and sun screen. :cool:

:disco: Let's see some pics!! :disco:

Brake lights on, not fully dark outside yet.

i just ordered mine today and can't wait - how was thier shipping time?

Someone take a pic of one side with LED and the other stock and I bet more of these things get sold. I look at these pics and just can't tell how bright they are.

I did but the camera doesn't do them justice. If you look at the surrounding area of my picture you can see how bright it is. I am serious they are very bright. :cool:

i just ordered mine today and can't wait - how was thier shipping time?I ship same day when I have them in stock. Right now I can't keep up and in stock. Every time I reorder they are usually sold out by the time they get here. If theyare out of stock, runs about 3 days to ship out.

Mike

Ok - so you're out of stock right now? When do you expect your next shipment?

Not at the moment, but that may changed in the next 5 minutes the way my orders have been going. I have been receiving 2 shipments a week from the manufacturer trying to keep them in stock.

Mike

Ok - so you're out of stock right now? When do you expect your next shipment?
Yours will go out Monday. I had the lights but didn't have the gaskets for some reason.

Mike

great - thanx, that was an excellent price on those gaskets btw

Do you have a set of tails and backups in stock for a 68? If so, I'll order tomorrow.

Jim

They are in stock

Mike

can you tell me if my items shipped? and do you have a tracking number?

thanx Todd

So did the 68 RS situation get figured out? Is there any difference between the 2? I have 68 RS and want to get a set....

can you tell me if my items shipped? and do you have a tracking number?

thanx ToddAs discussed on the phone shipping today 2nd day so you have by the weekend

Mike

So did the 68 RS situation get figured out? Is there any difference between the 2? I have 68 RS and want to get a set....

67RS and 68RS led tail lights are the same. Camaro Performers installed the in a 68 bezel so they will fit. I still need to update my store to reflect it though

Mike

As discussed on the phone shipping today 2nd day so you have by the weekend

Mike

Thanx

I'm very impressed so far and i'll plan to use you in the future.:thumbsup:

YEAH, :waving: don’t forget about us 67’s. Any word on when they are going to make the light available for the Standard 67?

Thanks :cool:

YEAH, :waving: don’t forget about us 67’s. Any word on when they are going to make the light available for the Standard 67?

Thanks :cool:
I don't think there in the works yet. I am sure they will eventually be available.

Mike

Mike,
Just ordered mine. Can't wait now :sad:

I just ordered a set online for my '68. Looking forward to getting them in.

I followed a link from Pro-Touring.com

Just ordered a set! :)

Tony

Everyone's orders from the last couple days are going out today and I am out of stock again for another couple days till the next shipment arrives Tuesday. Thank you for your support!

Mike

Any idea when the 69's are coming out?

Any idea when the 69's are coming out?I have not been told of any date yet. I do have '69 LED's in the sequential set up, see the digi-tails thread below

Mike

Can you comment on the difference between these and the Digi-Tails? I assume the digitails have a tighter grid of LEDs for the animation? Any difference in fit and finish? Thanks!

Can you comment on the difference between these and the Digi-Tails? I assume the digitails have a tighter grid of LEDs for the animation? Any difference in fit and finish? Thanks!
Definitely more LED's in the digi-tails. Quaility is great on both. Digi-tails do not include the lense and are DOT compliant but not DOT approved where the others include the lense and are DOT approved. The difference to me is how much do you want sequentials for the cool factor.

Mike

I do speed control aka. cruise control installations in various vehicles and have run into probles with these led lites . Requires adding some resistance in light wiring . Do you know if these complete units are causing problems?
I installed a cruise control into a 68 first gen and cruise would not operate , after a few hours of testing, I stumbled on the led type tail lamp bulbs.

I do speed control aka. cruise control installations in various vehicles and have run into probles with these led lites . Requires adding some resistance in light wiring . Do you know if these complete units are causing problems?
I installed a cruise control into a 68 first gen and cruise would not operate , after a few hours of testing, I stumbled on the led type tail lamp bulbs.
The digi-tails will require an upgraded flasher unit, but have not heard of any problems yet. The others I sell operate on a voltage range of 7.7-14.0 volts and have had no issues so far with them. Now if you installed LED's in the front and back, upgrading the flasher unit would be a necessity.

Mike

The 67 and 68 are quite different. The 67's are smooth all across the surface and the 68's have 2 sections that project out of the bezel.
I don't see how a 67 will fit properly in a 68.
Can you check with your supplier to see when a 68 RS will be available?
I just received a set of the '67-'68 RS LED's for my '68 RS and guess what, the lenses don't fit correctly like you said! There is a difference between the two lenses with the '68 having two raised sides with an indentation between them. The LED's for sale advertised as fitting both '67 & '68 RS will not work in the '68 RS housing like the originals. They may fit in, put will not look like the original lenses. I just wanted to post and let everyone know that I tried these and had to send them back. I too, would like to be advised when the company makes available a set that will fit the '68 RS correctly.

Mark

I just received a set of the '67-'68 RS LED's for my '68 RS and guess what, the lenses don't fit correctly like you said! There is a difference between the two lenses with the '68 having two raised sides with an indentation between them. The LED's for sale advertised as fitting both '67 & '68 RS will not work in the '68 RS housing like the originals. They may fit in, put will not look like the original lenses. I just wanted to post and let everyone know that I tried these and had to send them back. I too, would like to be advised when the company makes available a set that will fit the '68 RS correctly.

MarkAs I said in the email I sent to you, just send them back and when I receive them I will refund your money with no restock fee. I will be changing my description back to 67 only until I get the issue resolved. No one else had had an issue (or told me there was until now) and a set were installed in 68 bezels in a Camaro Performer magazine with no mention of improper fitment.

Mike

As I said in the email I sent to you, just send them back and when I receive them I will refund your money with no restock fee. I will be changing my description back to 67 only until I get the issue resolved. No one else had had an issue (or told me there was until now) and a set were installed in 68 bezels in a Camaro Performer magazine with no mention of improper fitment.

Mike
The point I'm trying to make here is if you are looking for an original, stock looking LED tail light lense for your '68 RS, these are not for you. They will probably fit in the '68 bezels but won't look anything like the originals. Maybe you could state this in your item description (will fit '68 RS, non-original looking)?
Like I stated in my previous thread, if you get lenses in stock that will match the '68 RS originals, please let me know and I will purchase them. I will be sending you the lenses back today for a refund. Thanks for all your help in this matter.

Mark

The point I'm trying to make here is if you are looking for an original, stock looking LED tail light lense for your '68 RS, these are not for you. They will probably fit in the '68 bezels but won't look anything like the originals. Maybe you could state this in your item description (will fit '68 RS, non-original looking)?
Like I stated in my previous thread, if you get lenses in stock that will match the '68 RS originals, please let me know and I will purchase them. I will be sending you the lenses back today for a refund. Thanks for all your help in this matter.

Mark
Ok, now I see the issue. You are referring to the non-stock look of the lense, not that they don't fit. If that is the case, the DIGI-TAIL line we carry that have sequential operation go behind the stock lenses. They are more expensive because of the sequential function, but the sequential function can be turned off if you don't want it. They do require an extra power wire to operate because the computer controlled led lights and require replacing the 1157 socket with a weatherpack connector. They have the same warranty as the others you just received. They also highly recommend no load flashers but are not required if you are just running led's at the rear. They are $209 a set. Pic is of both the std and rs set.
http://musclerodzstore.com/ProductImages/spaghettiengineering/Camaro_67-68_Rear_STBandRS_Kit.jpg

Mike