|
Infamous Aug 4th, 04, 01:00 PM What do I fill this seam in with? Thanks! Go here. (http://www.infamouscamaro.com/DSCF0011.JPG) [ 08-05-2004, 02:57 PM: Message edited by: Infamous ] 69lemans Aug 4th, 04, 03:06 PM I use 3M fast'n firm, #08505. Infamous Aug 5th, 04, 11:58 AM Can I use body filler? Like Evercoat Rage? shoddy_F-body Aug 5th, 04, 05:26 PM No, it will crack if you use body filler unless you weld the seam solid.Use 3m urethane seam sealer. green z Aug 6th, 04, 03:57 PM I agree with shotty F body. If you use fast and firm it will get a crack over time stingr69 Aug 7th, 04, 07:00 AM After dealing with that issue for many years, I have decided it is better to weld that sucker shut and draw a cut off wheel over the dressed bead to simulate the seam. That is what we did for my car this go around. I would do it again for sure. They always crack otherwise. -Mark. BuddyP Aug 10th, 04, 02:40 AM what about lead? Allen M Aug 10th, 04, 06:50 PM Before I suggest anything, I need more information. Are you trying to fill the seam for a smooth look or keep the factory look and prevent rust? | ||