Does anyone have pic's of their 67 SS with the Marina Blue Paint with the white Bumble Bee Stripe on it on it that they could E-mail me. & what are the dimantions are the stripes? Thanks. My E-mail Address is jdr_dlr@bellsouth.net

------------------
1967 RS/SS 396 Camaro

Its not a bad looking color(no pics). I just got done fixing a fender on a 67 vette that is Marina blue. I you need, I have the dimensions of the stripe that goes across the ft. end.

------------------
67 Camaro SS Conv.
70 Challenger R/T Conv.

Ragtopman please e-mail the front stripe dimensions to me, this is the stripe i would like on my ragtop.

Thanks Jeff
68 Conv.

Hey i would love to have the Deminisions of the Stripe for my car & the paint formial for the Marina Blue. I know that it is FF but that # is old & the local Paint shop has a Promblem dealing with old formals.

------------------
1967 RS/SS 396 Camaro

If you go to the sherwin williams paint page you should be able up their code for marina blue. I did it a while ago with mine when i painted it that color. I'll try to find the number around my house somewhere incase you can't find it.

i just sold a 67 marina blue to a dealer go to deals on wheels and then click on dealers then classic muscle cars there web page will pull up and it will be on there

Give me a sec. and Ill get the dimensions and the formula #s for both PPG and DuPont.

------------------
67 Camaro SS Conv.
70 Challenger R/T Conv.

ragtopman, I'll race ya to the PPG#.....Marina Blue Poly PPG # 13346.
I win!!! Now for DuPont.....Ok You win on that one. http://www.camaros.net/forum/smile.gif
Austin

Guess I was in to big of a hurry, the CORRECT PPG # is 13364, but I think I still won.

Here it is everybody. 1st, the DuPont # is 4850(you win Austin). The measurements are as follows, and these come off of a marina blue header panel.

Starting from the back side(against the hood)at the edge(where the header is bolted up against the fender)measure 2 1/8 in forward. Thats the rearward skinny stripe. It is 1/8 in wide. Measure another 1/8 in.(thats body color)and the wide center stripe is approx. 3 11/16. Make 2 more 1/8 in stripes and you should have it. Now for the center of the header at the peak, the rear ward 1/8 stripe is 2 5/16 from the back edge.

Using 3Ms green fine line(I like it the best)tape, you should have no problem putting the stripe on a car. If anybody needs any other measurements, just post it and Ill get it posted(but give me a day or so). http://www.camaros.net/forum/biggrin.gif

------------------
67 Camaro SS Conv.
70 Challenger R/T Conv.

Thanks Guy's for all of the information on the Stripes & paint codes.Johnny

------------------
1967 RS/SS 396 Camaro

[This message has been edited by johnnyr (edited 03-22-2001).]