okay so im trying to mount the WOT switch for my n2o i have a holley street avenger carb and an edelbrock preformer intake maybe im blind or had a few too many :beers: every time i look at it but i am having a tough time finding a place to mount a bracket and the WOT switch. i bought the edelbrock #72282 bracket but still cant find any place to mount it.

if you have any ideas or pictures that'd be great, thanks again


doug

http://i76.photobucket.com/albums/j5/evilbeef54/P1030052-1.jpg
http://static.summitracing.com/global/images/prod/large/edl-72282_w.jpg

The Bolt Holes in the top Leg of that Bracket wouldn't by chance line up with the Screws that mount the Bowls and Metering Plates onto the Carb or bolts on the Accelerator Pump, would they?

What is suppose to mechanically Trigger that switch the Throttle Linkage or the Accelerator Pump Arm?

i dont think so, those holes are a little too close together and that would have te switch angled all wrong, i think

I believe it goes on the other side of the carb, where the choke actuator used to be (can't use it with a choke).

ah ha, well i still have the electric choke, so i guess i'll have to return this and find a new bracket

if you have any ideas or pictures that'd be great, thanks again


doug

I assume this is for the car in your sig. Get a factory bracket and switch for a th400 kickdown. Adjust it so it only comes on at WOT. You can get the bracket and switch from any of the restoration places.

www.yearone.com part# RA31