On my 68's L.H. frame rail there were two nutserts above the rear axle one on top ,one to the rear then there is one hole to to front of the two that has nothing in it is this correct.? If I could post pics. it might be easier to describe.

Will to post pics read the link in my signature here. You need to have your pics hosted on the web somewhere. Or if you are a paid gold member you can then use our system. :)

Here's the LH side on my 69. The 2 holes in front (left) of the shock are for mounting a rubber bumper on a metal bracket. The orig exhaust bracket is to the right of the shock with the orig screws still in it.

http://www.camaros.net/showroom/data/500/69ExhaustSSplate.jpg

Here is the RH side showing the axle bumper in place

http://www.camaros.net/showroom/data/500/DSC00006.JPG

I Don't think the 68's have that bracket.

You may be right. Sorry I couldnt help, but all I have is 69.

On my 68's L.H. frame rail there were two nutserts above the rear axle one on top ,one to the rear then there is one hole to to front of the two that has nothing in it is this correct.? If I could post pics. it might be easier to describe.

Hanger location for dual exhaust.:thumbsup:

Ok, my ? is should all three holes have a nutserts or just two .

Dosn't anyone have a factory duel exhaust car that they could take a peek at these l.h. hanger inserts for me or Am I the only one who has such a thing?As said before I had two inserts in the three holes is there supposed to be three I would really like to figure this out for this weekend as I will be putting the complete trunk floor in & if needed I could hold the inserts from turning while mashing the nut. Thanks.

If you do a search for "dual Exhaust frame" and then read through the posts about 68s, you should find something useful including photos.

http://www.camaros.net/forums/search.php?searchid=1342722

It look like there should be four rivnuts, one for each hole in the hanger bracket. I do not have my 68 AIM here to confirm.