"NEW" RICHMOND RINGGEAR AND PINION,WITH BEARING KIT FOR GM, 12BOLT REAREND.THIS IS FOR GM 8.875 "C" AXEL,RATIO 4.10 TEETH 41-10,PART NO. ON THE BOX IS 69-0304-1 CHECKS OUT AT RICHMOND GEAR.COM"

Any idea if this will work for my Car, pumpkin pictured below.
68 Camaro with what I believe is a Chevelle rear end.
http://pic20.picturetrail.com/VOL65/1569870/15970637/263504119.jpg

http://pic20.picturetrail.com/VOL65/1569870/15970637/263504719.jpg

That is a GM 12 bolt but I doubt if it came out of a Chevelle (unless some one cut off the "ears" were the upper control arms bolted onto the top of the pumpkin). I would recommend that you get the new gears installed by a professional as it is involved; it is not difficult, but requires lots of trial and some error (it is the error we are trying to minimize), specialized tools and patience.


Larger Dave

"C" refers to car axel. As far as I know with the right carrier it will fit (3 or 4 series ?)