I have an 84 Camaro I am building a mild 350 for, I am putting heads off of a 98 chevy truck which are the vortec heads "L31" 64cc 194/150's, I am looking for a set of headers for it and was wondering if a set of headers that is listed for 82-92 camaro are gonna work??? Thanks!

They should. I'm thinking the exhaust ports are in the same location and drill patern.

the tops of the ports are slightly taller than on older heads, but we're only talking small fractions of an inch here. standard headers will bolt up and work fine.

yup, location and bolt pattern are the same as any other head... spark plug angle is a little unique and might cause issues depending on the header. My Hooker LT's had major plug interference on #7. I had to dent the heck outta the primary tube AND wrap the plug boot in several layers of heat tape to keep it from burning.

...as far as I know these are the only headers that have that problem.

I ordered up the Hedmans thanks