hey,

Just wanted to ask who makes tubular upper and lower control arms that dont cost an arm and a leg?? All replies are welcome. Thanks

what's the value of your arm and leg? mine are worth far more than the $400-$700 that most CA's cost. LOL.

tubular lowers aren't worth the trouble. the stock ones are hard to improve upon. as for uppers, the spc adjustables from scandc.com are fantastic. in my opinion, way better than the tubulars, and cheaper, too.

Try the roundy-round guys and I think that you will find that they are cheap enough.

Start w/ Speedway and go from there.

Also, do a search b/c it's all here!

pdq67

tubular lowers aren't worth the trouble. the stock ones are hard to improve upon. as for uppers, the spc adjustables from scandc.com are fantastic. in my opinion, way better than the tubulars, and cheaper, too.

I also have the scandc uppers, they are great, and cost considerably less than the others.

CCP (a sponsor here) has the cheapest, but not the best looking, IMO. Speed Tech, which is also owned by a TC sponsor, is what I have. Pretty inexpensive and GREAT looking! If you are going to be needing the adjustability for different applications then definitely get adjustable. I know I would never be adjusting mine once set.

Hmmmmm. Arms that don't cost a leg. HUMOR!