Since I'll be needing another trunk lid for my 69 Z28, I was wondering how accurate the repo's are. How is the fit? Got any pictures of the underside to compare to the original GM pieces? Thanks,
Jeff

Jeff;

Do a search for "Trunk Lids" in this section - several good old posts will come up.

Did this myself to research this a while back.

There's an NOS one listed in the for sale area. Get your piggy bank out though!!

I have one of the goodmark lids and it is a very good repo in my opinion. I looked at a lot of used GM lids and they all seem to be warped, so I decided a good quality repo was the best way to go...

Gambitt

I bought the Goodmark Trunk Lid and it fits perfect. I recommend it highly.

Same here. Excellent fit. Seems to be about as heavy as the original.

I used a goodmark lid and it fit fine, but it was about 1/16 narrower under the spoiler area (made the seam gap a little wider), but the spoiler hid it, The underside was a perfect match...hope this helps Mike

Thanks for the info guys.

As a follow up, can anyone that has one of these repro trunk lids take a picture of the underside so I can see if it looks correct. I'm not too worried about getting it to fit properly, but if it doesn't look correct on the underside I may have to find a solid original.

Here is a pic of my Goodmark trunk lid (yet to be sanded/compounded clear coat runs and all!) The fit was fine but it is definitly not as sturdy as the stock lid.

http://www.philwoolford.com/camaro/trunk.jpg

That looks real close to a stock lid! graemlins/thumbsup.gif
I can't find a difference. Kevin

Appears to be missing some access holes for the spoiler. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6161&item=2416285419 Scroll down to the pic of the open trunk lid.

Jeff, here is a pic of my NOS one. http://community.webshots.com/sym/image6/1/24/57/75212457kVuOWY_ph.jpg If you need any more pics LMK. I bought a Repo (3rd gen golden legeon?) from D&R I picked up at Carlisle spring 2002. It fit pretty good but didn't notice the bottom holes. When I get back to the body shop I'll take a peek. I did notice the GM was heavier.

Scott

ok we'll try this smile.gif

http://community.webshots.com/sym/image6/1/24/57/75212457kVuOWY_ph.jpg