HI I am stuggling with the seat mount. I Drilled out a bunch of spot welds. (maybe 20) and the thing is not budging. Am I missing something?

nope your not missing anything but there is probably double that amount of spot welds to drill out keep at it

Bob

Ditch em with the floor and buy new ones. You'll be much happier.

OK Found the problem and hope this may help others in the future. Their are several spot welds that you can only see form the bottom. They are in the front and 2 actually are above the subframe mount. It was a real Pain in the arse. In addition if you have a air chisel it helps lots