I had to do some rust repair on the rear tail pan around the back-up light's. I need someone's assistance on either getting a template, or if possible maybe someone could give me the measurement's on how the side's are notch for a 69. I remeber how it supposed to look I would just like to have the exact measurement's.I don't need the placement of where they go because I marked it when I removed them.Any help would be appreciated.

------------------
NOTHING LIKE A 69 !!!!!

Do a search on this. Someone about 6 months ago gave all the exact dimentions for this. I used them to install the lights on my car.

Thank's RickB1B,but I looked back at the previous post and they were for 67's and 68's.I need them for a 69.I don't need the location, as I have measured the location before I removed them.I need to know the dimension's of the cut's of the hole's as well as the size of the hole's drilled out on each side.

[This message has been edited by Pat's 69's (edited 07-16-2000).]