I want to use this on my next 67 protouring project.

What do you guys think?:thumbsup:

http://i7.photobucket.com/albums/y299/screamindemon1/HoganEFI.jpg

I want to use this on my next 67 protouring project.

What do you guys think?:thumbsup:

http://i7.photobucket.com/albums/y299/screamindemon1/HoganEFI.jpg

they're very cool looking, and will make good power depending on the combo. I've had a couple of theirs, including one on my current twin turbo LS2, they work very well and look awesome.

Jody

Jody,:thumbsup: checked out your website.
Very nice.
Some bad *** rides for sure.

I love it. We have Hogan building us a Cross Ram Tuned port for Project EmptyNest. I cannot wait to get it.

has anybody built a fuel injected 572

I"m installing tom nelson intake on a 572 it is a work of art.
http://img169.imageshack.us/img169/6457/dsc7564ze0.jpg

They are all very pricey!!!

I"m installing tom nelson intake on a 572 it is a work of art.
http://img169.imageshack.us/img169/6457/dsc7564ze0.jpg

That is sweet. But as stated very pricey.:thumbsup:

Both Hogan and Nelson intakes are unreal!!
I have a Ram Jet 502 and one day I will have a rectangular port 502 with something like a Hogan Sheetmetal Intake so I can turn 510h into a Monster!! With Twin Turbos of course.

Hogan all the way!

Hogan is a great intake if have the clearance for it. I'm using the stock ss hood so its a must. How does the hogan affect hp and torque?

I too have a Hogan. Mine is very similar to the first pic in the thread, but likely a little shorter. I was anal about wanting to keep the stock hood, and based on my measurements, this was as high as he could go.

Main problem was the low height, combined with a 90mm throttle body, left very little room for the thermostat... he made it work, but its pretty restricted.

http://farm4.static.flickr.com/3097/2665908988_d47eb935a4.jpg?v=0