Well i just got back from a old friends estate setup. Helped them for some old parts. I now have an original pair of valve covers and air cleaner top. Fuel pump and lines all the way to carb. Got the shroud also, cracked thought. Pair of bumpers too. I think i also have the 2 bumpers ettes?
Are these kind of were you bolt them on before u put the rear bumper on ?
About a foot long? Pair of front rotors too. I just noticed that on the under side of the air cleaner are the factory instructions for air filter care and AC number. Do people need pictures of what this stuff looks like for restoration? I have never seen this valve covers before, they have a funny notch on the top for cleance for the underside dripper on the drivers side. Also the rear light assembles for a rs ss camaro minus the lens. Leaf spring plates too. Speedo cable and speaker grills. Exhaust hangers too. pair of roof rail chrome. Bottom door carpet chrome strips

One happy camaro guy!

If you mean a little bump out on the inside rear of the driver side valve cover for a big block, that's a valuable piece. If it needs minor repair and rechroming, you have a valuable piece. If it's perfect, you hit the mother lode.

I paid $100 for that cover about 5-6 years ago, and paid $300 to have a pair rechromed.

It cost you 300.00 for rechroming the pair. These are the first i have ever seen. So it sounds like it would be worth chroming. I helped the guy take them off his engine. He replaced with aftermarket. Is the air cleaner top worth chroming too?