Hello again,My question is about cutting the holes out of the rear panel for the RS back up lights.As i understand it there is the rear panel which needs to be cut of course.what is making me hesitate is the other panel behind the first?Does this require the same hole cut out or just the first one.Does this hole go straight thru both panels as if you could see the gas tank,or just one panel.The reason i ask is when im ready to insert the housing how do you fasten it to the tail panel.Is this done from behind.or is it screwed on first to the tail panel and then the lens is put on?or is it fastened from behind.

This must of been posted before.But was still confused with the second panel.Also does anyone know the exact measument for the pigtail holes that enter the trunk for the wires.

Ive searched several sites and found a few,but never of the inside panel from undernieth the car.Never in any great detail.Could someone post pics of the real thing.Or could you help out in anyway you can.Thanks and HAPPY NEW YEAR.
FYI its 1:52 AM here.

[This message has been edited by late68 (edited 12-31-2002).]-

[This message has been edited by late68 (edited 01-01-2003).]

[This message has been edited by late68 (edited 01-01-2003).]

The panel behind the tail panel has round holes punched in it. Ill take some pics of mine in the morning and post or send them to you along with the DIA measurments

hey HC, could you send me same, i am getting ready to do the same thing and have been wanting to ask same question, thanks so much
Jake

Well while you are sending the info out, could I get added to the list?

Im goign to TIG weld a new lower center sectioninto my rear valance and need to add the lights. Only the lower edge is bad due to someone hauling the car and the straps pulling the edges up. The panel in in great shape other than that. I think that its enough that it stretched the metal.

Please include me as well with this, as I too will be cutting out the backup lights in the near future. Thanks in advance.

Could I also be added to this list?

I want to see the photos also.
Would like some measurements also if possible.
Thanks...

Hey folks I havent forgot about the pics. took them today and when i was going to send them out I found tht my Card Reader is still in my office. I will send them out monday Afternoon to all those that needed them.


------------------
Jeff 67/68(2) & 69 RS's

http://hobbystage.net/camaro/hawaiiancamaro/index.html

please add me to the list as well...


ps
mahalo...

John

rick's sells a template that is pretty easy to follow.

I came across this website the other day and I figured I would pass it along. They have templates for the backup lights as well as for most any trim piece.
http://www.camarotemplates.com/

Thanks Jeff,you saved me a couple of bucks!

stringdom----sent you an e-mail but it came back saying you have reached your mailbox limit size.

Jeff, You must have missed me. I sent you an email for the info. Thanks. Bob

------------------
<A HREF="http://www.geocities.com/bh3chevy/Bobs_All_Chevy.html" TARGET=_blank>69 X22 Camaro
68 Camaro
72 Nova SS
82 Corvette
</A>

Jeff....have You changed your e-mail addy? I sent You an e-mail a while back for this info and never got a response...I just figured you were busy or something....

still chlupsajeff@hawaii.rr.com make sure you put something in the subject block pertaing to chevy or Camaro or it might get deleted if i dont reconize the sender.

------------------
Jeff 67/68(2) & 69 RS's
http://hobbystage.net/camaro/hawaiiancamaro/index.html

[This message has been edited by HawaiianCamaro (edited 01-08-2003).]