Can someone post some pictures of how your transmission cooler lines are routed?


TIA

Sure! I know you must be running the same setup as mine, right?;)
These were new, exact replacements, but needed to be tweaked a little to line-up to the radiator.
http://epitomesrebuild.com/images/216.JPG

Fred,

Thanks, I'm running braided, just as I thought coming up under along side the oil pan.

If you running braided I ran mine up through the pass. inner fender it took about 18' of an-6 though.

I have 20 feet of #6, so you just have it laying between the inner and outer fender? David, do you have any pictures? I'm trying to stay away from the header. That's why I was thinking of running the lines along side the oil pan.

I don't have any right now and my car is in the paint booth I'll try to get some pics this weekend. I don't think the lines were anywhere close to the headers as I recall.

Dave,

Did you ever take any photos of how you routed your stainless lines. I need some Ideas I'm currently coming across my headers and that can't be good.

TIA