this is shopman again. I have got my door glass in on my 69 camaro. I am having trouble getting the glass adjusted. It is not high enough in the front and too high in the rear. It was a pain getting it in. I marked all of the screw heads before I took them off. But just can not get it straight. Lost all religion I had putting it back in. Sure could use some advice on what I did wrong. Thank" guys, Jerry:sad::noway:

First Thing Sit Back And Have A Cold Beer, Step Two Loosen All The Bolts And Pull Your Door Glass By Hand To The To The Top As Far As It Will Go, Then Tighten All Bolts, If Your Glass Stops Short Pull Out Your Door Glass Stoppers At The Top Of The Door And Try Switching Them, If That Doesnt Work Have Another Beer And Call A Glass Installer Good Luck

This is shopman. Tim I did sit back and had one then I went to work and got the glass strsight and it"s done. Then I had another one with my son and said one more thing done to the 69 camaro.:noway::beers:

Shopman Job Well Done, The Beer Does Come In Handy At Times. Best Of Luck

Hey Shopman, you don't have to introduce yourself every time. We know it's you. :)