Hi guys,
You guys who have done BOTH the 3rd Gen power steering conversion on a 69 small block coupe as well as the Vintage Air Gen IV swap, I need some info. I had manual steering before. I need new pulleys, I understand I need 3-groove crank pulley, 2-groove water pump pulley, and I believe single groove power steering pulley. My problem is i can't seem to find the right combination in Classic industries, firewheel classics, etc. And Rick's has pissed me off.
Can anyone help me with the right part numbers for these pulleys?
I looked at Camaros.org and got part numbers there, but they show numbers for just A/C, just power steering, and for both options. I'm just not sure if those numbers would still be correct using the Gen 3 power steering box and the gen IV A/C. It all gets pretty confusing, and i know some of you have done both already.
Thanks in advance.
rj

With it being 3rd gen steering and the new gen IV Air will not make much difference. The only question should be is what are you using for a power steering pump. Is it a bolt on pulley (stock) or the newer pressed on pulley ?

bolt on original type from classic industries
thanks rj

Sounds like you are all set ! Everything should work fine.