Can somebody supply the correct size of the "Bumble Bee" lines, so my body shop can paint them in my 68 Camaro SS without having to purshase the stencil? Need dimensions and reference points to make them as original as possible. The car is about to get out of the shop after nine long months. Any help will be appreciated.

I do believe that the measurements are in the assembly manual. If you dont find them, let me know and Ill go measure mine for you. And you said 'correct'? The small lines are of an odd size.
67 Camaro SS Conv.
70 Challenger R/T Conv.




[This message has been edited by ragtopman (edited 10-07-2000).]

Thanks a lot "ragtopman", but finally I decided to order the "SS" stecil of the lines that goes all the way to the doors. Those were the ones that my car had prior to the body restoration. I didn't meassure those before because they were wrongly painted. So thanks a lot again for your reply anyway.

Orench - I think you are headed in the right direction with the stencil kit. I took very careful measurments of the bumblebee stripe on the nose of my car before we stripped it and I will look them up if you need help.