68z28sd
Mar 28th, 08, 07:11 AM
digging through some old parts and came across what i think is a 69 camaro hurst shifter. part number 12709120, could this be original and what is it worth?
|
View Full Version : 69 camaro shifter 68z28sd Mar 28th, 08, 07:11 AM digging through some old parts and came across what i think is a 69 camaro hurst shifter. part number 12709120, could this be original and what is it worth? mean buzzen half dozen Mar 28th, 08, 07:16 AM If the shifter is the round type,could be OG, worth,you have the linkage or just the shifter? Complete,100-200? JOE58 Mar 28th, 08, 07:22 AM will need to post a picture to ID it. There were a bunch of different round stick Hurst shifters used in many different cars in the 60s-70s 36j1967 Mar 28th, 08, 07:23 AM We need a photo. 68z28sd Mar 28th, 08, 07:49 AM it is complete with linkage. i can't post pics i could send one to some one and they could post it for me? JOE58 Mar 28th, 08, 12:33 PM email the picture to me and I will post it JOE58 Mar 28th, 08, 03:25 PM here are the pictures. It is not for 69 Camaro. It looks like a 1970's Trans AM/Firebird shifter with a bent stick You can tell more if you pull out the stick to check for the Hurst ID number that is on the flat part of the stick (that is pressed into the shifter). It may still sell on ebay for about $100 or more since it has the rods and levers 68z28sd Mar 28th, 08, 04:53 PM ok just a 4speed shifter it is. mean buzzen half dozen Apr 8th, 08, 10:00 PM x2,,, it is not a 69 Camaro shifter. MBHD al8apexer Apr 9th, 08, 12:34 PM here are the pictures. It is not for 69 Camaro. It looks like a 1970's Trans AM/Firebird shifter with a bent stick You can tell more if you pull out the stick to check for the Hurst ID number that is on the flat part of the stick (that is pressed into the shifter). the 2nd photo shows multiple bends in the lever, pretty sure that is not an f body shifter or a bent one as stated above. ALSO as stated above, if you were to pull the lever out and get the number off it, that would go a long way in IDing it terminatorL89 Apr 9th, 08, 05:04 PM Hello I am intrested in the shifter ! can email me the numbers , an will accept money orders? power2innovate@rcn.com |