Anyone have an exact (or close to) measurment for all of the clips that retain the Lower chrome windsheild molding on a 1969 Camaro Coupe.

I know that the manuals say "screw in" but where and how exactly do they mount.....as well as the 2 side clips?

If I am missing it in the assembly/body manuals please let me know.:)

I layed the molding on with the clips in it after the top and side moldings were on and put small pieces of masking tape at the top of the molding to help align them.I didn't get them in the exact factory location or the correct amount but its on straight and there to stay.As for the sides the clips kinda need to be put on {if after market} before the fenders because the hole don't line up with the factory clips..Hope this helps if not sorry for the long winded discussion.

In addition, there's two L-shaped stops that prevent the windshield from sliding down. Sorry, mine are covered up or I'd get the dimensions for you.

these pics should help you out.........

this is a 1968 convertible.i think they should be the same location.......



http://i25.photobucket.com/albums/c74/1963wagonman/101_0025.jpg
http://i25.photobucket.com/albums/c74/1963wagonman/101_0022.jpg
http://i25.photobucket.com/albums/c74/1963wagonman/z28/101_0009.jpg
http://i25.photobucket.com/albums/c74/1963wagonman/z28/101_0007.jpg
http://i25.photobucket.com/albums/c74/1963wagonman/z28/101_0024.jpg

Those pics and infor helps.....Almost looks as though I just have to put it together and mark them.