gsxrpilot
May 3rd, 08, 11:20 AM
Car number 1
Vin# 1234379L50587
ST 69 12437L0S131969
TR 711 76 76
10D X038
WHAT IS A X038?
CAR 2
VIN# 123479L521306
ST 69 12437VN238363
TR 723 57 57
2A
B377
BLOCK# 3932386
HEAD# 2570
MOTOR# AC540V09T7DZ
CAR 3
VIN# 124379N676555
ST 69 12437NOR110595
TR711 71 71
1 OR T 8E X77 D80
BLOCK# 3970010
BELL HOUSING# 3858403
TRANNY# 885784
IF ANYONE CAN TELL ME WHAT I AM LOKING AT WITH THE X038 AND IF THESE ARE #'S MATCHING...
THANKS
KEN
KEN@CKAUTOS.COM
mb302rs
May 3rd, 08, 12:10 PM
The XO38 is on a los built car is a plant internal plant code . And has nothing to do with the options on the car. Weekends can be a little slow on responses. but I'm sure some of the #s experts will chime in before long :thumbsup:
gsxrpilot
May 3rd, 08, 12:12 PM
Thanks need a little help before making a mistake!!!
click
May 3rd, 08, 12:23 PM
Ken check #1 again, Vin is wrong... the number after the L needs to be 6 digits. You only show 5. That car will be VERY close to mine. My VIN ends with 505849 and my Trim Tag is 132383 mine was also built in 10d which is 4th week of Oct of 1968. My internal code is X164 which puts them about 126 cars apart. Cousins of sorts :D
Rsmith1969
May 3rd, 08, 12:24 PM
Car 1 as posted above is a Los Car and is internal plant code
Car 2 the Motor Numbers dont make any sense if thats a Z/28 and DZ engine
Car 3 The 1 or T 8E Should probably be more like 08E for the build date
Re-check the numbers
RobSS1113
May 3rd, 08, 10:37 PM
Im no expert But for sure they are all 69's by what you posted. "Final answer Regis" !
mccorry
May 3rd, 08, 10:48 PM
Ken... as Jim (click) mentioned... please recheck the VIN off the first car. You're missing a digit.
Car #2 looks OK as far as the Trim Tag matching up with the VIN.
gold67rs
May 4th, 08, 07:24 AM
Even missing the last digit you can tell the VIN lines up with the build date on the first car.
Rick H.
gsxrpilot
May 5th, 08, 07:58 AM
My question is are they real Z28's? All the cars are with one owner... Almost to good to be true. Checked numbers frow what I wrote down and could see.... What am I looking at exactly and what is the right money for frame on restored cars? (PAINT JOB)
Kurt S
May 5th, 08, 08:20 AM
Not even close to enough info to make that determination.
Spend the $$ and have Jerry MacNeish look at them and *know* what you are buying.