gtate@tatespc.com
Dur@.050
Int234 Exh 244
valve lift Int 488 Exh 510
lobe Int 107 Exh 117

Wanting to put this in my 327 .30 over
293 heads headers offenhauser intake
also have a set of 186 double hump
but they are not 202 either set.

That's like the old-school RPM cam that imho, need's like 11 to 1 to run it's best.

I'd install no more than a good old CC 268HE, Crane/Cam Dynamics 272/272 Energizer or Isky's 270 Mega and go!!

And it will like you better IF you install a solid lifter cam like one of these.

Isky's Z-20, CC's 270S, the small Crower and even the little-bitty, GREAT old Stock Duntov -097 cam..

I mention this b/c the little jewel will love to rpm.!! Just install at least Z-28 valve springs and you are good to go!

The little Duntov that was in my old junk301 would hit 7500+ rpm easy w/ new points!!

pdq67