|
Weave67RS May 23rd, 08, 09:48 PM I would like to buy a throttle rod for my 67 Camaro. Does anyone know which throttle rod is correct for a SB 327 with a Q-jet. I have seen 2 different rods in the catalogs. There is one with a slight bend and another with (4) bends? Any help and pictures would be appreciated. Thank Ken hereitis67 May 23rd, 08, 09:58 PM my 67 with a 350 motor and edelbrock has a slight bend to it. not 4 bends on it. maybe 4 bends is a 6 cyl i dont know tho. DjD May 23rd, 08, 10:15 PM The 4 bend is for a Holley equipped car, the other is for a Q-Jet. 6 cyl 1st gens got a cable... KevinW May 24th, 08, 04:14 AM All the first gen cars I saw in my youth and the SB rods I took off Camaros I was parting out were straight, no bends. Never saw one with a bend in it until I saw the pics in a catalog. :) DjD May 24th, 08, 07:33 AM So it sounds like you never parted out a Z/28 or BB car then Kevin... Check the AIM at least in '69 it shows the 2 piece bent rod used on a Z/28 and a BB. The straighter one piece as the base one used. opelitis Jun 1st, 08, 01:30 PM DJD, what is the AIM pls.??? T. DjD Jun 1st, 08, 01:52 PM Factory Assembly Instruction Manual KevinW Jun 2nd, 08, 04:30 AM So it sounds like you never parted out a Z/28 or BB car then Kevin... Check the AIM at least in '69 it shows the 2 piece bent rod used on a Z/28 and a BB. The straighter one piece as the base one used. Very true Dennis! If it was, I would not have been parting it out! :D | ||