JcGc
Jul 2nd, 08, 08:35 PM
Does anyone know what size the treads are for the port directly behind the carberator. I need to get a fitting for my transmission vacuum line.
As always, thanks in advance.
As always, thanks in advance.
|
View Full Version : Edelbrock Performer RPM JcGc Jul 2nd, 08, 08:35 PM Does anyone know what size the treads are for the port directly behind the carberator. I need to get a fitting for my transmission vacuum line. As always, thanks in advance. kcart55 Jul 3rd, 08, 07:04 PM I can check the one I have sitting in my garage in the morning... :yes: 67CamaroRS/SS Jul 4th, 08, 07:20 AM Why not use the port on the drivers side of the carb? That is actually where Edelbrock recommends for tranny vacuum. JcGc Jul 4th, 08, 07:56 AM I have a Holley dp and my vacuum advance hooks into the side of the carb and my pcv hose hooks into the back of the carb. Only place I have left for the transmission vacuum is the port behind the carb. Pro-Street69Camaro468 Jul 5th, 08, 07:43 AM I think its 3/8 I put my PCV into it with aeroquip... novaderrik Jul 5th, 08, 11:36 AM 3/8" Npt JcGc Jul 7th, 08, 12:51 PM Thank you for the information. Least now I know I ordered the right size fitting. |