I decided to go a little further today on the dismantling of my 69 Coupe. I removed the full rear quarter on the pass side today. Along with the center trunk floor to tail panel brace. I also separated those little support plates that are tack welded and glued onto the underside of each rear quarter (just outside the trunk weather strip gutter area above the wheel. I also removed the outer trunk gutter on the pass side too. I left those support strips that are tack welded onto the sail panel to window channel area. They were not included with my new Good mark full quarters so I decided to save them. I will remove them later on and recondition them to use when I install the new full quarters.

Here is the link to my 4th slideshow on photobucket....

http://s299.photobucket.com/albums/mm298/6781camaro/1969%20Camaro%20%20SS350/th_Tailpanelw-oquarterpanels.jpg (http://s299.photobucket.com/albums/mm298/6781camaro/1969%20Camaro%20%20SS350/?action=view&current=1df83e2a.pbw)

Nice project . Good luck with it. :thumbsup: