http://www.rickscamaros.com/product.asp?pf%5Fid=AB%2D21&dept%5Fid=3113

Im looking at purchasing this 4 wheel conversion kit from Ricks but Im not sure what else I would need to have an parking brake.. my drum parking brake system is complete and in tact.. can any of it be reused?

I called Ricks and they told me I needed PB-31, 33, 35, 36, 39, 16, 23, 32 and 34 ... really??

My cars a stick and I want to do a 4 wheel conversion, need the parking brake..

First thing make sure you get the right kit for staggered shocks. Next looking at this kit picture I see calipers that have the e-brake built into them and also see 2 cables that connect right into your 1st gen rear e-brake cable assembly jist like the drum cables did, it's very straight forward...

http://www.rickscamaros.com/images/rfg/large/l_AB-24.jpg

Its the MBM kit from the looks of the pics. Dennis is right on- make sure you get the staggered shock kit for the 68-9. Basically, you flip one caliper bracket, and use two of the same side calipers in the rear so that the bleeders face up as they should. Those are the only differences.. E brake connection should not be too difficult.