Looking for a picture of how these are routed. I added P/S to my car and they rest awful close to the headers, not sure if theres some sort of retaining clip somewhere for them

they go down below the motor mount between the frame and the motor to the pump. there is a clip that bolts on to the front bolt of the steering box to hold them back and keep them away from the headers. my smallblock they are about 2 inches away from the headers.

ricks camaro part# PSP 24 and PSP 35 should work for you

There's also a wire clip to hold the two hoses adjacent to each other.

This is the best i can do.


http://i145.photobucket.com/albums/r216/skeeter55/Picture481.jpg
http://i145.photobucket.com/albums/r216/skeeter55/Picture292.jpg

I assume the car you're talking about is the '68 327 auto in your sig. If so, mine is a '68 327/275, so they should be the same. I did a bunch of research on this. Do a search under my user name, and you can see the post I made about this. Here are some pics. Hope they help... Brian

http://i28.photobucket.com/albums/c237/68Vert/DSC05633.jpg
http://i28.photobucket.com/albums/c237/68Vert/DSC05632.jpg

My car is unmodified, and the hoses are routed exactly as in 68vert's pictures

The engine is a 327/210, and the top hose clears the header by about one inch. The rubber does not show any ill effects from the heat