joes66
Aug 24th, 08, 11:24 AM
Hello I was just getting ready to order some axles from moser and pulled these out.I knew they had the c-clip ends on them to run stock c-clips so I just assumed that somebody put the eliminators on a stock chevy axle.I took the axles out and noticed they looked alot beefier than the stock axles for a 12 bolt I have.They are stock 30 spline axles but are larger in every other way than a stock 12 bolt.The tubes are 1.325 compared to a 1.140 stock size axle.The flange on the axles are .425 compared to .335 on a stock 12 bolt.Im trying to identify what they are and if they are worth keeping.I put a couple of pics on here also.The one picture is the flange where the wheels mount.It wasnt flat across like alot of aftermarket axles I have seen but indented like a stock style.There is a number and letter in them so Im hoping somebody knows what it is..The letter is a m and it has 54 on it.I have pictures of it posted on team chevelle if anybody would like to see them.If they are decent axles then I could save 4hundred bucks and put it somewhere else.thanks in advance..Joe