on my 69 sept. built camaro there was two brackets welded to the under floor pan, kinda looks like a up-side down hat with a tapped hole in the middle to hold a clamp that hold my brake line on one side, and one on the pass. side to hold the fuel line just under my seats, the assembly book does not show this bracket. it shows it being installed directly to the floor pan. anyone understand what i'm trying to explain. i'm wondering if this was normal or something like a late build change because it really looks like factory install.

My Oct 68 built vert has both of those brackets. AIM does not show every detail 100% correct, just enough to let the UAW folks put the cars together.

thanks eric just wanted to double check that they were not a add on by someone else and then i weld them on and not be original.

My Feb 69 build Z has them as original.

All of these on my 68 convert are held in place by a self tapping hex screw. My fuel and brake lines where original

just so everybody knows what is being talked about.....pic is worth a tho......ahhh you get the idea!
http://i153.photobucket.com/albums/s229/zbo2/09-09-08010.jpg