Anyone have one of these? http://www.tuffstuffperformance.com/products/part.asp?partid=179 I'm looking for a 1 1/8" bore with a short rod master cylinder thats chrome. I found this one for $139. http://spideraccessories.stores.yahoo.net/stuff2071na.html Any good? It says Disk/Disk apps also. I have disk/drum. I am going to use a combination proportioning valve with it.

Same one as this http://www.jegs.com/i/Tuff+Stuff/908/2071NA/10002/-1

You do have a power assist right?

With that size bore you may need it with a stock brake configuration.

You do have a power assist right?

With that size bore you may need it with a stock brake configuration.

I have a 1 1/8" bore now. It's going on a Hydroboost unit.

Anyone have one of these? http://www.tuffstuffperformance.com/products/part.asp?partid=179 I'm looking for a 1 1/8" bore with a short rod master cylinder thats chrome. I found this one for $139. Any good? It says Disk/Disk apps also. I have disk/drum. I am going to use a combination proportioning valve with it.


Yup, that is exactly what I installed on my car..the only trouble I had was that the short rod was not "short" enough and caused dragging brakes. This was not the master cylinders fault but the booster since the rod comes with the booster. Once I fixed that problem it has been working great ever since (1 year now). Note I used combination valve as well for disc/disc application.

http://i10.photobucket.com/albums/a130/z282nv/Joes1969ChevroletCamaro004.jpg?t=1222734543

Z282nv Nice engine compartment.
Wayne

Z282nv Nice engine compartment.
Wayne

I appreciate the compliments Wayne!