View Full Version : 67 RS Reverse light wire/gromet hole location help


TraxUnderground
Oct 6th, 08, 03:57 PM
Hi..I was hoping someone had a pic of the hole locations in the trunk pan where the reverse light wires pass thruogh to the RS backup lights underneath. Mines a 67 and dont know if the locations were different for a 68 or 69. I did a search and whatever pic was shown was removed at somepoint. I have all new sheetmetal and didnt notice where the holes were...probably because they were rotted though. I appreciate it..thanks

TraxUnderground
Oct 7th, 08, 08:13 AM
Ummm I guess it was a dumb question. Nevermind...I just drilled holes in pretty much the only place I could between the trunkpan and the frame rail on top of the reverse light housing. The AIM doesnt get to detailed.

clwilcox33
Oct 7th, 08, 02:25 PM
Sorry I didn't see the post. I could have taken pics of mine.

tejasrs/ss
Oct 7th, 08, 03:57 PM
hey Chris..post some pics! I had my trunk pan replaced so I need to relocate the hole for the back up lamps.

Jonesy
Oct 7th, 08, 04:06 PM
This has been discussed many times in here. All you had to do was click on search and type in "RS backup lights" and you would have found 13 pages of posts with some relating to your question.

Here's one with pics:

http://www.camaros.net/forums/showthread.php?t=136272&highlight=backup+lights

Sometimes alot of questions can be answered by using the search feature here in the forums.

Jonesy
Oct 7th, 08, 04:06 PM
http://www.camaros.net/showroom/data/500/RS_Reverse_grommet.JPG

TraxUnderground
Oct 7th, 08, 05:11 PM
This has been discussed many times in here. All you had to do was click on search and type in "RS backup lights" and you would have found 13 pages of posts with some relating to your question.

Here's one with pics:

http://www.camaros.net/forums/showthread.php?t=136272&highlight=backup+lights

Sometimes alot of questions can be answered by using the search feature here in the forums.


I did do a search. I said so in my original post but I guess I should have used backup instead of reverse. I did read through many old posts but the pics were removed already. thanks for the pic.

TraxUnderground
Oct 7th, 08, 05:16 PM
Sorry I didn't see the post. I could have taken pics of mine.

Thanks Christopher, I appreciate it. By the looks of the pic shown, I guessed pretty darn close when I drilled. I guess I missed the thread with the pic in my search. My car is a resto-mod and just wanted to get in the ballpark.