Ok - after painting the dash I started to put it all back together. After I put the instrument cluster back in, I started the car no problem. When I pulled on the headlight switch - first stop parking lights on, second - no headlights...also - speedodometer seems ok but on the fuel gauge, the needle is below E when off and comes up just past E when powered on.

What are your thoughts on the headlight issue. (the bright switch on the floor was not re-installed yet)

For the fuel gauge - just take the cluster back out and move the needle to E manually?

Thanks

Regarding the headlight issue, hooking up the bright light switch on the floor will fix that!:yes:

Regarding the fuel gauge issue, grounding the instrument panel will fix that!:thumbsup:

Thanks. Where did the little ground wire attach on back of the cluster?

Next to the bright light indicator.

OK - thanks for the input

Headlights work since the dimmer installed!

Regarding the fuel guage. Today it actually swept counterclock wise to about the 3 oclock position from about the 5oclock position - still need suggestions please.

Steve

Check the sending unit ground wire at the rear of the car.....If good then bad sending unit??

Do I have to set the fuel gauge at E or something before I put it in the cluster then the cluster in the dash? Can someone share a diagram of the ground wire please?

Thanks