I have a 68 bird drivers door that I was given to use for parts awhile back and never needed them, Cleaning out the garage today and the door will hit the dumpster if no one needs anything off of it. It is a complete drivers door-

Let me know if anyone can use something off of it before I pitch it.

i need a door latch mec if you have one

It should have one.. I will pull it out and see how it looks . i will let you know.

Jim

Is the upper hinge in good condition?

Biggdog69- I pulled the latch- Heres a pic- Its greasy but I believe it is in good shape. Let me know if you want it.

Batboy- the door does have the top hinge-Only the top. I will have to take a look at it and get back to you on its condition.

http://i228.photobucket.com/albums/ee64/jsouthco/fd73e1a2b669.jpg

is the door rotted?

The door has a little rust at the corners,but I have seen much worse...The bottom and sides are real nice,,(Would need new skin)

I attached some thumbnail photos.

http://i228.photobucket.com/albums/ee64/jsouthco/th_Firebirddoor001.jpg (http://s228.photobucket.com/albums/ee64/jsouthco/?action=view&current=Firebirddoor001.jpg)

http://i228.photobucket.com/albums/ee64/jsouthco/th_Firebirddoor002.jpg (http://s228.photobucket.com/albums/ee64/jsouthco/?action=view&current=Firebirddoor002.jpg)

http://i228.photobucket.com/albums/ee64/jsouthco/th_Firebirddoor003.jpg (http://s228.photobucket.com/albums/ee64/jsouthco/?action=view&current=Firebirddoor003.jpg)

http://i228.photobucket.com/albums/ee64/jsouthco/th_Firebirddoor005.jpg (http://s228.photobucket.com/albums/ee64/jsouthco/?action=view&current=Firebirddoor005.jpg)

http://i228.photobucket.com/albums/ee64/jsouthco/th_Firebirddoor006.jpg (http://s228.photobucket.com/albums/ee64/jsouthco/?action=view&current=Firebirddoor006.jpg)

http://i228.photobucket.com/albums/ee64/jsouthco/th_Firebirddoor010.jpg (http://s228.photobucket.com/albums/ee64/jsouthco/?action=view&current=Firebirddoor010.jpg)

http://i228.photobucket.com/albums/ee64/jsouthco/th_Firebirddoor008.jpg (http://s228.photobucket.com/albums/ee64/jsouthco/?action=view&current=Firebirddoor008.jpg)

That would be a nice one to reskin. Shame to trash it. I'd take it if i was closer.

I know..It is in decent shape.. Maybe if no one else has a need for it,I will buy a skin and use this as a learning experience. Putting a new skin on is something i have yet to do...

Wife is on me to clean up the garage though.. I have fenders, cowl, header.. Just sitting around waiting for me to get to cleaning them up. I dont know how well reskinning a door i dont need will go over..:D

Post it on craigslist for $50.:)

Sure could use the full length bottom from the skin to curl up for the inside panel.

I have the shell on CL right now. If it doesnt sell in a week, I will cut off what you need. You will need to tell me specifically what you want.

Jim

:hurray:That would be great thanks.

I'll take the latch how much to ship it to ct thanks

Biggdog,
Do you want just the latch or the rod also? Give me a name and address too...

Just the latch Jim you can email me at melissa124s@aol.com thanks ed

Ed-
Did you get the latch?

Bottom of the door still avail?

Rick,
Can you tell me specifically what you need? I would want to have the money to ship in hand before I cut the shell up...Please be specific , a picture with the area you need highlighted would be best.

Let me know- Jim

Thanks Jim,
The bottom of my 1969 Camaro door has been eat'n away on the horizontal inside above where the rubber seal would rest. Full length of the door and approximatly an inch wide, yet the rest of the door is prestine, as a result of years of rain with no door window seals.

So if you wouldn't mind cutting just above the lowest body line on the outside skin continuing around the taking the complete lower part of the door both inside and out.

Now shipping, please ship via U.S. Postal service with an International Flat-Rate Box I will include a link below this is good for up to 20 lbs. and no customs charges, or duty as the part is worth less than $20.00 and will be used on a Historic vehicle. I will pay for shipping and what ever you would like for your work let me know the total charges.

Link to USPS: http://ircalc.usps.gov/IntlMailServices.aspx?Country=10054&M=2&P=15&O=0&sd=0

Shoot me an email for my shipping address.
Email: homer20@storm.ca

I am not looking to make money on any of this- Just trying to help out some other Camaro owners as so many others have done for me!:beers:

I will take a look at the door tomorrow and will send you an email to get your address. I think I will need to get a new cutoff wheel so it may take a day or 2.

Jim

Hey Jim,

How about the door handle on that door. Is it still there? If so, what condition is it in? ....Jb

Johhny B,
Door handle (Outside) is still there. I will have to take a look today to verify its condition. I will get back to you later today.

Jim