I recently installed headers on my '68 Camaro 327 and I have tried several brackets that say that they are for this sort of thing but they have not fit on my headers because some of the pipes of the headers are in the way. I have Headman headers. I need an idea of where to go to find the right brackets. PLEASE HELP!!!

------------------
I. Larsen

Mr. gasket makes a bracket that works..i use one...it fits over the first header pipe and used the same two bolts as the header...then there is another bracket that bolts to it...all together it takes 3 pieces to get it ...but there are several "low mount" brackets that mount off the front cover that may work instead...check with summit or jegs.

I have the same bracket and it works great. The low mount ones hit my frame, so I couldn't use them.

------------------
Brad
68, 327, TH350 (assembly in process)
Godspeed #3

If you have accessory holes in the heads try using a 1980 or so Corvette lower bracket, upper brace, and belt guide. This system is light years better than anything else I've used. The parts were still available 6 months ago from GM and will run about $65 for the whole enchilada.

------------------
Click here to see see my car and hear 5-speeds. http://www.geocities.com/casanoc