I would first like to say thanks for all the information that I have gained from all the great Camaro people. I have been building a little red 84 Z, motor, tranny and rearend is done. Now the problem, on to the interior, I have hooked up the voltage, water and oil gauge. I am building an aftermarket gauge cluster of a 160mph speedo, tach and fuel gauge. What wires on the factory harness can I use for the fuel gauges, pos. side, ground side and sending unit side?

I would first like to thank all the guys on forum for all the great information. I am hoping that someone out there will have a quick fix to my problem. I have been building a 84 Z, motor,tranny and rearend is done. I have now started on the interior. I have the water, volt, and oil gauges hooked up. I am building my a dash with a 160 speedo and tach and a aftermarket fuelgauge. I am wanting to use the wires from the factory harness for the fuel gauge. Which wire goes goes to to fuel gauges pos. side, ground side and fuel sending unit side?