I don't have the speedometer to test fit in the panel yet to see if the cable reaches. Right now the cable just reaches the stock gauge with no more play. Did any of you have to change out the cable to reach? It's the mechanical gauge.

Mine was tight but reached fine. Just make sure you put the speedometer on the same side as it was before.

Mine was tight but reached fine. Just make sure you put the speedometer on the same side as it was before.

Well, just tried to test fit. I have no more slack on the cable and I'm an inch short! You know what the stock length is? I need around 1 more inch.

Try going under the car and pushing an inch up from the bottom? But, it sounds like you already tried that.

I have no idea what the stock length is but I do know there was more then one stock length depending on the options (engine and trans I assume)

I got it to reach:D. I had to move a clip underside to give me more slack.