I received my digitails light kit and opened the box but noticed NO instructions on how to install, nor can I find any articals on the web to aid in this. I am at work looking all the stuff over so I cannot see the car also but I figured there would be at least an explaination on installing both the flashers and explain how the circuits hook up for the tail considering originally I only had 2 wires to the turn and brake light bulb...this kit has 6 wires.....can anybody give a little advice here or did the instruction sheet get left out?

What happened to the person/people/C0.you bought it from?


MBHD

look on the super chevy website. The have a past article on this that may help.
I know I have seen it on there before

I received my digitails light kit and opened the box but noticed NO instructions on how to install, nor can I find any articals on the web to aid in this. I am at work looking all the stuff over so I cannot see the car also but I figured there would be at least an explaination on installing both the flashers and explain how the circuits hook up for the tail considering originally I only had 2 wires to the turn and brake light bulb...this kit has 6 wires.....can anybody give a little advice here or did the instruction sheet get left out?You should have instructions in the box somewhere. If not, call or email me and I will get you a set. What do you need to know?

The flashers replace the mechanical flashers currently installed, and the pigtail goes to ground. The seperate orange lead wire plugs into your dome light connection for power. Black is ground, yellow and green are turn, brown in running lights. I don't think I missed one, but not looking at a set right now either. Boards are marked on the back side where the go. Let me know if you have any more questions.