My drivers side glass shakes around a lot when it's half way down and I noticed there is no bolt holding it to the sash channel like on the passenger side. What is this bolt called and where do I get one? The 68 parts look different.

My drivers side glass shakes around a lot when it's half way down and I noticed there is no bolt holding it to the sash channel like on the passenger side. What is this bolt called and where do I get one? The 68 parts look different.

Are you talking about a bolt that sits by itself just aft of and below the wing window, about three inches long with a self tapping thread?

If so, you can get it from AMK (http://www.amkproducts.com)

The part is:

G-6362 VENT WINDOW CHANNEL > DOOR; #10 X 3.0" SS/CHROME PH OV SCREWS (2 PCS PER PKG) US$ 3.00

Fair warning:This bolt can be a bitch to put in place, be patient

If this is not what you're looking for, better include a picture

Hope this helps

The glass has 1 hole in it where a bolt passes thru and fastens it to the sash channel. The passenger side one on my car looks similar to this...http://www.rickscamaros.com/product.asp?pf_id=WR-83&dept_id=3377
but this is for a 68. I can't find one that says it's for a 67, they all say 68-69. Is the 67 one the same? It's for the main door glass and the hole is at the rear of the channel. There is a roller mounted to the channel below this hole.

I got you now, I was totally confused in my first answer

I checked the pdf version of Ricks 2006 catalog, page 16, and there's a pretty clear drawing of the assembly. Unfortunately, it says that 'many parts are currently available "good used" only'. Your specific part does not appear to be listed, unless it happens to be part of the WR-68 kit (which I doubt)

I also checked Classic Industries 2008 catalog and a few others, but I've come up empty

Maybe a call to Ricks might bring in a lead on a used component?

I have one. PM me. Scott