Hi Guys, I'm putting power steering on my rs/ss 4p 350ci camaro,I'm trying to save some money and use used parts.My friend gave me a pump and brackets off of a 1968 Impala 327ci,I know thats not the right brackets for my car,but would it work ok in my car(not hit anything once the motor is droped in)Just don't wana spend time and paint on this stuff if it isnt going to work! THANKS JARED

Hi Jared,
I think you will be OK with the Impala setup. The short water pump was used until 1968. You will also need a Crankshaft Pulley, Part Number 3751232.
Hope this helps.

TORY,I've got the power steering pulley off the Impala it reads 3751232BBGM,it looks like the right one,but I'm not sure. I also found a crank pulley off of a 64 Impala <1 grove> #3755820BC,do ya think this stuff will space right ?THANKS MAN!

TORY , all the pulleys and # came off the crankshaft! after reading my post it did'nt read right!

Hi Jared,
Those pulleys should work just fine.
If you need any help, please PM or e-mail me.

Thanks , thats what I was wanting to hear!Still looking for a water pump pulley, The one I had was cracked In the middle,If any one has any give me a call! 660-686-2559

motor mounts vs power steering bracket isnt working out.The 327 lower power steering bracket that I'm wanting to use bolts up to the top front and lower bolts of the motor mount.The problem is that my new mounts are caged in like a box at the bottom,no place to slide the bottom bracket hole to bottom motor mount hole.I thought maybe I could use 327 mounts because there all open at the top and bottom but rick's first gen said that the 350 mounts let the motor sit lower for hood clearance and the 327 mounts sit higher.Can any one help!Seems like its 2 steps forward and 3 steps back!

If I'm not mistaken you need the power steering set-up for a 67 ss350 car and they are different than the 327 power steering brackets for 67 cars. Hope this helps.