hey guys, i wasnt sure where exactly where to post this, but i thought you guys would know the answer.

i want to set my interior up with a roll cage, and basically look a drag car, but im not sure where i would get the stuff?

im probably going to go with the aluminum panels, and the dash

heres two pics that i took at the races, and i want something similar to them:

http://i39.tinypic.com/nyipn8.jpg

http://i44.tinypic.com/2q8q106.jpg

where exactly would i be able to find these to buy? i dont really have the tools and experience to totally custom fab these

thanks!

I would see if there is a local chassis builder in your area.You can check with Alston chassis to see what they make for your car.

I would see if there is a local chassis builder in your area.You can check with Alston chassis to see what they make for your car.

thanks, but im not really seeing any interior stuff, just front suspensions and rear ends?

this is for a 69' camaro BTW and im only looking for the dash stuff, i can do the roll cage myself :thumbsup:

edit** i did a few google searches, and this came up: http://www.camaros.net/classifieds/showproduct.php?product=20737&cat=35

this is exactly what im looking for.. only one that fits a 69'

Check with Chassis Enginering, I made all my aluminum for my racecar. I had the cage
installed. You need to check with a local chassis shop.

the DSE dash insert like what your looking for?
http://www.detroitspeed.com/productpages/indproduct/interiorprod/dash_insert_prod.htm

Or, if you're refering to the pic of the 68, you can look into Covans Classic and/or AutoMeter. Both make products that might help you achieve the look that you are after with minimal alteration/fabrication.

thanks for the links, i didnt realize how expensive those were

Chris Alston's 'Chassisworks' might know where to get stuff like that.


I agree with the post up above though, generally a good, local chassis shop that would do frames, rollbars, etc. is going to do the alum. panels too. (or contract with a shop that does it)

Try anvil auto. just bought one of the 69 dashes, carbon fiber, It is very nice and fits perfect. has pods built in for 21/6" guages