BamaBoy
Aug 25th, 03, 02:03 AM
Will the TH400 cross member work on the 4 speed?
|
Everett#2390 Aug 25th, 03, 03:08 AM No, a P/G;3-spd;TH350 will be needed, the "straight" one. Also, there is a difference between a SBC & BBC. SBC trans mounting slots are in the center, side-to-side, BBC's are towards pass side approx 3/4(?) inch. When installing x-member, be sure to install correctly, i.e., the three 3/8 inch holes for the OE shifter mount go to the driver side. This will also correct for the "tilt" of the trans mount. Keep your TH400 x-member in storage. BamaBoy Aug 25th, 03, 04:51 AM Nothing is ever easy; is it? Hey thanks for the info Everett, I appreciate it. Anybody got a BB, 4 speed crossmember for sale? :rolleyes: 67FREAK Aug 25th, 03, 12:44 PM is there a difference from small block and big block. i just swapped my 4 speed for a turbo 400 so i have the 4 speed crossmember laying in my garage. it is not in new condition but it does work. david nitrous383 Aug 25th, 03, 04:16 PM 4 speeds rock! when they stay together... R.I.P ST10 Novaguy73 Aug 27th, 03, 01:09 PM You could fabricate one if you know somone with a welder. Start in the middle and work your way out | ||