Good news!! I got in contact with Holley Tech services and e-mailed them the thread on the problem people were having with the 2131 3/4" primary super comp headers. I just recieved an e-mail from the senior product manager from Hooker Headers division and he wants to fix the problem. :hurray:
I know about the pitman arm clearance issues and the collector flange drivers side lower bolt problem. Please if there are other issues with this part number of headers please add to this thread and forward them to me along with pictures and I will forward them on to Hooker. This is our chance to make these header fit properly.
Thanks
Maurice
mjmccall@shaw.ca (Please include Camaro headers in the Subject line)

- The driver's side header hangs way too low

- The passenger side header interferes with the factory fuel line on a '69, but otherwise
fits well

PS It's not idler arm clearance(pass side), it's pitman arm clearance (driver's side) Thanks for the work.

Thanks Al, I ment the pitman arm, corrected the post, fingers got ahead of my brain.:thumbsup:
Maurice

It also hits the drivers side upper control arm edge and is real close to the rag joint.