the gab between the fender and tire are different from side to side and i add washer on a arm
and gab is 1 inch can any one help me with that here is some photo

http://img231.imageshack.us/img231/7333/dsc00632pe5.th.jpg (http://img231.imageshack.us/my.php?image=dsc00632pe5.jpg)


http://img502.imageshack.us/img502/7091/dsc00634nm6.th.jpg (http://img502.imageshack.us/my.php?image=dsc00634nm6.jpg)


http://img518.imageshack.us/img518/3373/img00013200901261853cy4.th.jpg (http://img518.imageshack.us/my.php?image=img00013200901261853cy4.jpg)

You need to take some measurements and make sure your sub-frame is in the car straight. Adding or removing shims to the area you pictured (upper a-arm) is not going to change the gap in the top two photos.

I cheked the sub-frame and a arm there are no hit or anything



Thanks

A basic alignment could work wonders

do you think maybe it from the subframe bushing
the bushing are very old