Does anyone have a picture in the trunk area of the holes for the back up light wiring. I am looking for a picture of where the wire goes through the trunk floor to the lights.

If you search this site, you can find it, cuz I know it's been posted before. I did it, and as I recall, just outboard of the brace, toward the corner on each side, there is a dimple in the trunk floor pan. I remember drilling at the dimple with a 1/2" drill bit, and this allows the rubber plug on the harness to seat perfectly.

Somewhat recent thread:

http://www.camaros.net/forums/showthread.php?t=148381

Thanks Dave, that is what I needed.

I see Classic Industries has a gasket for between the light and body. I called Ricks and they dont have them and said they did not come from the factory with a gasket. So does it take a gasket. I wanted to use one to protect the paint. 67/68 do use a gasket.

Mike i didn't use a gasket on mine, no problems with them or the paint...
http://i145.photobucket.com/albums/r216/skeeter55/00011112.jpg

They didnt come from the factory with a gasket. You shouldnt have any problems.