Some of you have have seen this on protouring.com, but it seemed appropriate to post it up here too. :)

We are now selling a locking Billet aluminum gas cap to replace the oem cap on 67-68 Camaro's. It is a direct fit with the exception of drilling a couple holes. Comes with a billet filler neck that is compatible with stock style tanks. We also offer a short neck that can be used with in trunk fuel cells. It is available in clear or black anodizing.
http://www.ridetech.com/catalog/Precision_Coachworks_Products-2488-1.html


http://www.ridetech.com/images/products/preview/pcw6500v.jpg

http://www.ridetech.com/images/products/secondary/149_thumb.jpg

http://www.pro-touring.com/forum/attachment.php?attachmentid=28558&stc=1&d=1234965822

Sweeeeeet!

I've been waiting on this. Nice...

Jim

wow. nice! how much coin for one of those?

Here's a picture of the black one installed on my car.

http://i26.photobucket.com/albums/c105/DanBabb/68CamaroRS/CamaroGasCap.jpg

I only had one issue (not a RideTech problem). My gas tank isn't the original one (it's a custom built tank) and when it was installed, the tank neck is in the center of the trunk. The stock tank was actually offset a hair to the passenger side, so I couldn't get a good fit between the filler neck & the tank neck with the rubber fuel hose that came with the kit. I ordered some of that clear flexible fuel hose from Pegasus to hopefully get it to fit better.

^ That looks excellent.

Jim

$250 for the clear, $260 for the black.

Is this Larry's(Pro-Touring.com) cap?

Yes...RideTech took over the project from Larry. Long post about it over at pro-touring.com.

Darren,

Will there be a group purchase or anything?

Darren,

Will there be a group purchase or anything?

good idea! :beers:

We have never tried with the group purchase thing. Might try Frank over at GP Superstore, (AKA Prodigy Customs). We have dealers all over the country. Here is a link.....
http://www.ridetech.com/links/index.php?id=2

That is very nice!
I think I need one, Lol