My name is Kieran. I have a 67 camaro that I have been working on for what seems like forever. It had been gutted so sometimes I run into interesting issues. I purchased a clutch and brake pedal assembly and install kit. It came with everything I need including the pedals, bellcrank, return springs, bellcrank frame pivot bracket, etc... It didn't come with the bolts that bolt the bellcrank frame bracket to the frame. Does anyone know what size bolts these are? I think there are three of them... Thanks

Bolt size lsited in this thread:

http://www.camaros.net/forums/showthread.php?t=92735&highlight=z-bar+frame+bracket+bolts

This thread has info about how the original 67 bracket (which your subframe may be tapped for) and the 68-69 bracket (the only repro part sold, and is listed as 67-69 when it's not) differ. I just didn't want you to be surprised when the three holes in the bracket don't line up with the ones in the subframe.

http://www.camaros.net/forums/showthread.php?t=125342&highlight=clutch

I think there 5/16 -18

My name is Kieran. I have a 67 camaro that I have been working on for what seems like forever. It had been gutted so sometimes I run into interesting issues. I purchased a clutch and brake pedal assembly and install kit. It came with everything I need including the pedals, bellcrank, return springs, bellcrank frame pivot bracket, etc... It didn't come with the bolts that bolt the bellcrank frame bracket to the frame. Does anyone know what size bolts these are? I think there are three of them... Thanks

As jcfcamaro says. They're 5/16th X 1" but they are a self tapping style bolt with a fluted cutter near the tip. Some auto parts suppliers like NAPA carry them.

Thanks for the quick responses. I'll run by napa tomorrow and try to find these bolts. As for the bracket, I did see an "early 67" bracket at Rick's Camaros I'll look into it should the one I have not work. Much appreciated.