I am getting close to finishing the interior of my 68 Camaro and found that there is supposed to be some kind of molding, I think probably rubber or plastic, that goes around the inside of the back window. Does anyone have a preferred supplier of this material and how it is attatched? Also, on the passenger side of the headliner there is something similar or maybe the same as windlace missing there too. I guess the same question applies to this item too. Any suggestions would definitely be appreciated.

It is plastic. It attaches easily, but a little tricky as you go around the top corners. I got mine from Rick's.

There is also 3 or 4 metal pieces that the head liner rolls around are they there.I got mine from Ricks also...

Thanks for the replies. The headliner is rolled around some metal. It looks like someone just pulled the stuff off and who knows now where it is. It looks like it is supposed to run the full length of the headliner and the windsail panel. I don't see any way special that it attatches other than just a push on crimp fit type of thing. I have a Classic Industries and a NPD catalog but must be looking in the wrong place or they don't carry it. I will get in touch with Rick's and get some. With little 'interior' experience, it makes it hard to put things back together that someone else has taken apart!

Classic Industries has them

http://www.classicindustries.com/controller.cfm?type=product&action=keywordSearch&keyword=headliner%20molding&productSearchCatalogId=1&productYearId=2

K887- back window 3 pieces
K885- front window 2 pieces
K854- side pieces
R347 says it is a kit.

Classic Industries has them

http://www.classicindustries.com/controller.cfm?type=product&action=keywordSearch&keyword=headliner%20molding&productSearchCatalogId=1&productYearId=2

K887- back window 3 pieces
K885- front window 2 pieces
K854- side pieces
R347 says it is a kit.

Thanks for the link. I don't know why but I couldn't find that. The kits are currently out of stock but I might still have enough of the original pieces that I can get enough parts to finish it up.

If you order through Classic Industries, don't forget to use the 20% off code of # PS7143 to receive your discount. Good thru March 31st.

If you order through Classic Industries, don't forget to use the 20% off code of # PS7143 to receive your discount. Good thru March 31st.

Thank you, every little bit of savings helps!