I am having an issue with my valve covers. I run fabricated pieces that do not have baffles and I am getting an exceptionally large amount of oil being pulled through my PCV. I run the style of grommets that are called "baffled", but they don't seem to be doing the job. Does anyone have any suggestions? Thanks.

I am having an issue with my valve covers. I run fabricated pieces that do not have baffles and I am getting an exceptionally large amount of oil being pulled through my PCV. I run the style of grommets that are called "baffled", but they don't seem to be doing the job. Does anyone have any suggestions? Thanks. Charlie these are what i use for my breathers, so far so good they have a little slit cut in the interior of the baffle.
http://www.jegs.com/i/Moroso/710/68775/10002/-1

Heres one for the PVS baffle.
http://www.jegs.com/i/Moroso/710/68772/10002/-1

just add a pcv catch can to your setup.

I had tried the rubber grommet style baffles but had better luck with these aluminum ones.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=MOR%2D68790&N=700+4294815112+115&autoview=sku